Types of poles:-
A) Octagonal pole: -
It names itself says that ‘octa’ means eight hence the shape of the pole is octagonal which eight side of bending to increase the strengthen of the pole. It is the type of street light pole which can be used at residential area, commercial area, industrial Area etc. It is continuously tapered with octagonal shape. These Poles are hot dip galvanized with 85-90 microns. The bracket of the poles will be designed according to the customer requirement like single bracket, double bracket and ring bracket.
The major accessories of the octagonal pole are foundation bonnets and brackets. There will be channel provision given inside the pole for fixing the MCB switches. The wiring can be lay inside the pole itself for the light fittings.
The base plate and the thickness of the poles can be designed according to the site conditions. Normal thickness of the pole will be 3 mm sheet. Octagonal poles will be e starting from the height 3mtr to 10mtr.
Octagonal poles are produced from high grade hot rolled steel coils by an automated procedure of cutting and folding /pressing the trapezoidal sheet into octagonal shape and welding the sides longitudinally by submerged arc welding. Below is the illustration of some standard octagonal poles for street lighting applications complying with SASO specification. Specification can be catered as per the requirement of clients.
B) Swagged pole: -
We are engaged in offering a comprehensive range of conical poles. Which is manufactured using superior quality galvanized steel conical poles to with stand dead loads and dynamic load acting on the pole. Designed with perfection. These poles are manufactured in accordance with international quality standards. Our range comes with three different types of poles, and is extensively used for outdoor lighting and lighting fixture.
Swaged pole shall be tapered type also known as telescopic shaped pole. Each section of the pole will be reduced diameter from the bottom to top section. These poles can be providing coating of Galvanised, powder coated, or painted. These poles can be supplied either painted or hot dipped galvanised depends on requirements.
Two types of swaged pole one base plate and another is digging type. For the base plate type the foundation Bolt nut and templates will be provided. for digging Type 1mtr long will be provided from the total height of pole which will dig inside the ground.